Garage door replacement can cost a lot of money. This is why; it can be a great headache if your current system is not functioning as smoothly as it was and you are not able to diagnose an exact cause. Don’t come to the conclusion immediately that you need to replace the garage door.

First of all, check the garage door repair troubleshooting checklist to fix the malfunctioning garage door. If you don’t know much about the structure of garage doors, consult professional garage door services such as Choice Garage Door Charlotte to fix your nonworking garage door.

• Search around:

The first important step you need to take is to look around for outside elements to find out the causes behind malfunctioning. You would be surprised at how many things can go wrong that can be caused the equipment malfunction.

• Cleaning of garage door:

Normally, it is observed that accumulated dirt or thick gooey substances are stuck on the tracks and rollers of the garage door. It is the result of exposure to dirt and extra lubrication used during garage door maintenance. The obstructions may cause friction that makes the garage door stuck while going up and down. You need to wash the garage door to remove the obstruction using any mild household cleaner or soap. After washing the garage door, make sure you dry every component thoroughly.

• Garage door lubrication:

Sometimes garage door does not function smoothly just because of the dry running components such as, rollers, tracks, or hinges that are not lubricated enough. The lubrication task should be performed at least twice a month. Just avoid the plastic idler bearings. Any high-quality silicone spray or powdered graphite can be used on metal tracks. Grease is good for rollers.

• Check the tension of springs:

It is also suggested that inspect the cables and springs to make sure that they are in good working position. Garage door extension springs that are placed on either side of the garage door are safer and easier to handle. But in the case of torsion springs, you need to call a local garage door technician to determine if they need adjustment or replacement. The highly tensed torsion springs would be complicated to adjust or replace so professional aid might be needed.

• Loose components of garage door:

The garage door is subject to general wear and tear. All the moving components such as hinges, bolts, and screws become loose especially if the garage door is used very often. You should check the screws and bolts involved in the operating mechanism of the garage door. It may help you to solve the problem. If you are not able to tightened screws due to bigger holes, you can use pieces of wood as filler. Adjust or replace the sagging hinges accordingly. Make sure that the wood frames where hinges are attached are in a good position.

Overall, a garage door is bulky and heavy equipment. So, it may take time to find out the defective areas. With this checklist, it will be easier for you. If you are not a handyman, consult a professional garage door technician to get free estimation for your garage door repair project.