How to Take Care of the Torsion Springs of the Garage Doors

The torsion springs are one of the most important but critical elements of your garage door. If they are not installed and maintained properly, they can break down causing fatal injuries.

This is why it is very important that you should take proper care of the torsion springs. Well, it is not a simple or easy task. There are several factors that you have to understand to confirm that you are ignoring any major dysfunction that may later prove dangerous and expensive. Since garage door torsion springs are dangerous components to handle on your own, it is strongly recommended that hire professional garage door services like, Dayton, Ohio garage door torsion spring replacement service to do this job for you.

While examining the physical condition of torsion springs, the first important thing which you should have with you is the user’s manual provided by the manufacturer. In addition to this, it is also important to check the other parts of the garage door to make sure that they are working efficiently. Here the owner’s manual will help you once again as it will tell you about the importance of various parts and what to check out and how they maintain. Also, it will explain to you in detail the components which you need to be adjusted and lubricated.   

Ideally, you should also check the moving hardware of the garage door to make sure that the screws and bolts are kept tightened. At the same time, they will be lubricated to allow them to run freely. The garage door tracks should be aligned as they will not shaking when goes up or down. However, if you experienced anything wrong, it means that garage door tracks need special attention immediately.

Also, it is good to make sure that the torsion springs of your overhead garage door are properly adjusted and tensioned. To test the strength of springs, you will have to lift the garage door to its halfway by hand and leave it to stay there.

In case, the springs are too tight, the garage door will go back but if the garage door springs are too loose then the garage door is coming down speedily. While inspecting it, you should move the garage door up and down by hand and determine whether or not there are any rubbing or cracking sounds. If you find it successfully, you should inspect it thoroughly to fix the problem.

Overhead garage door comes with the electric garage door opener. If you have one, it is necessary that you will take proper care of it as well. Here once again, the user’s manual is going to be necessary. Also, you should be careful about the safety measurements of the mechanism and inspect it on regular basis to make sure it will function smoothly.

Sometimes, you will have to adjust the tension of springs. Well, it is without saying, a dangerous and critical task and you will have to maintain the alignment of the torsion springs. It is wise to let it be done by a professional garage door specialist. This rule is also applied for the job of garage door spring replacement as well.